SL 600 (129.076) V12-6.0L (120.983) (1997)
2. Remove bolt on top cylinder and press piston rod all the way in.
3. Remove hydraulic lines (a, b).
NOTE: The hydraulic lines and connections on the hydraulic cylinder must be plugged immediately with plugs part no.129 589 00 91 07 and part
no.129 589 00 91 11 respectively.
4. Screw out screw
5. Remove hydraulic cylinder.
Installation
NOTE: When the hydraulic cylinder is replaced install water drain cuff on new cylinder.
6. Insert hydraulic lines (a, b).
NOTE: Bolt (internal hexagon) must be screwed in with screw locking compound (30 3 Nm). Screw in bolt (external hexagon) without screw locking
compound (90 5 Nm).
7. Install hydraulic lines (a, b).