SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-2687005.png)
2
Remove adjustment mechanism upward while pulling the drive out of the drive shaft (arrow).
3
Insert adjustment mechanism into drive shaft and screw onto backrest frame with screws (2 each).
Tightening torque: 35 Nm.
Installation note
The screws for the adjustment mechanism are micro-encapsulated.
They must be replaced after disassembly or coated with screw securing agent.
Continue to reinstall in opposite order.
