SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-2692012.png)
33
Screw in screws on outside and inside while inserting stop cable; do not pinch cable eye.
Observe installation note.
Tightening torque: 35 Nm.
34
Install clamping pin.
Length of clamping pin: 37 mm.
35
Turn left and right gear spindle all the way up against the stop. For this purpose stick flexible drive shaft onto gear drive shaft and turn manually.
