SL 600 (129.076) V12-6.0L (120.983) (1997)
Seat Cushion: Service and Repair
Converting Mount At Front of Front Seat Cushion
Preliminary work:
Front seat cushion removed. See: Remove/Install Front Seat Cushion and Backrest Cushion
Installation note
As of vehicle ident. end no.074890 (approx. 11/92) the front seat cushion mount was changed from a plug type to a screwed connection.
Only the modified parts will be available as replacement parts in the future. When replacing the seat cushion frame or mounting budge (connection) on
previous vehicles install the modified mount.
Conversion
1
Unhook seat cushion cover all the way around.
2
Remove rubberized fiber matting with cover from seat cushion frame.
3
Remove previous plug-in clips (10) and sockets (9) on left and right sides of seat cushion frame (arrows).