SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-784001.png)
Radiator: Service and Repair
PRECEDING WORK
Fan cowl removed.
OVERVIEW
Expansion tank cap:
Open (release pressure).
Coolant:
Drain from radiator (arrow).
To drain coolant:
Fit hose (inner diameter 12 mm) onto connection (arrow).
Drain plug (14):
Unscrew.
Coolant:
Drain into suitable vessel (10 liters).
Oil lines (7 and 8) of automatic transmission:
Unscrew from radiator (4), screw on.
Coolant hoses (9, 10, 11 and 12):
Take off, fit on.
Flat springs (15):
Unclip upward, clip in.
Condenser (20):
Unbolt from radiator (4), bolt on.
Radiator (4):
Remove upward, install.
Installation notes
The securing studs of the radiator must be inserted into the rubber pads (19) of the bottom cross member.
Cooling system:
Fill, bleed.
Oil level of automatic transmission:
Check, adjust to correct level.
Cooling system:
Check for leaks.
