SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-617003.png)
Attaching camshaft adjuster to inlet camshafts
1
Fit flange shaft (16) onto camshaft (22); pay attention to locating pin (21).
2
Bolt flange shaft (16) to camshaft (22).
Counterhold camshaft with wrench (25) 104 589 010100 for this step and tighten bolts (15).
Pay attention to tightening torque.
3
Push positioning plunger (14) onto flange shaft (16) in the fixed position rotating clockwise.
4
Push camshaft sprocket (13) onto positioning plunger (14) in the fixed position rotating anti-clockwise.
5
Fit on cover (12).
