SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-680004.png)
2
Unscrew TDC sensor (L1/1) from adjusting slide (10) and oil filter housing (1).
3
Unscrew oil filter screw cap (2) with wrench 103 589 02 09 00 so that the engine oil in the filter housing flows off to the oil pan.
Tightening torque 20 Nm.
4
Disconnect oil pressure switch (B5) connector and unscrew oil pressure switch.
Installation Note
Pay attention to seal. Tightening torque 15 Nm.
5
Unscrew torsion bar at front axle.
