mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
AR30.20-P-1262A Remove/Install Electronic Accelerator Actuator With Flap Connection|Page 3386 > < AR30.20-P-1262A Remove/Install Electronic Accelerator Actuator With Flap Connection

SL 600 (129.076) V12-6.0L (120.983) (1997)

Page 2
background image

2

Remove hot film mass air flow sensor together with air intake pipe

3

Remove crank case purge line (1/2)

4

Disconnect electrical connector (arrow)

NOTE:  Pull catch backwards.

5

Remove electronic accelerator pedal actuator (M16/1)

NOTE:  Undo screws (8/1).

CAUTION:  Installation: Replace O-ring (8/2).

Refer to Electronic Accelerator Pedal Actuator below

6

Install in the reverse order

Electronic Accelerator Pedal Actuator

AR30.20-P-1262A Remove/Install Electronic Accelerator Actuator With Flap Connection|Page 3386 > < AR30.20-P-1262A Remove/Install Electronic Accelerator Actuator With Flap Connection