SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-2332001.png)
Side Air Bag: Procedures
Removal
Observe all safety precautions.
See: Service Precautions/Technician Safety Information
Removal
Door trim must be removed first.
1. Remove ignition key
2. Drill out rivets [1] at retaining plate [3] of side airbag unit [2] and take side airbag off the door.
3. Unplug connector at side airbag squib [R12/9 or R12/10].
NOTE: When the connector is unplugged a short-circuit bridge in the plug connection of the squib is automatically activated.
WARNING: No further work may be performed on the airbag unit. The airbag unit must be stowed under personal supervision or, if it is
removed for a lengthy period, under lock and key.
Stow removed airbag units so that the outlet opening of the airbag (padded side) is facing up.
Installation
