SL 600 (129.076) V12-6.0L (120.983) (1997)
Cut paper strips according to drawing and mark as indicated.
Glue paper strips (W, Z) to catch so that upper edge of rotating lock (5) forms a line with the coupe roof catch (W) when the rotating lock is pressed
downward with thumb (against stop). Glue paper strips (X, Y) to catch so that upper edge of rotating lock (5) forms a line with the main catch (X) in
the locked state (press down with thumb to eliminate play).
W: Coupe roof lock
X: Main catch
Y: Switching range (2.5-3.5 mm in front of main catch)
Z: Switching range (2.5-3.5 mm in front of coupe roof lock)
Cloth Holding Brace Up Position
Removal, Installation & Adjustment of Limit Switch, Cloth Holding Brace Up
Preliminary jobs:
Remove occasional seats See: Body and Frame/Seats/Service and Repair/Procedures or baggage shelf. See: Body and Frame/Interior Moulding /
Trim/Service and Repair
Remove side panelling at left rear.
Removal