mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 6159 > < Standard Pump|Page 6156
Page 1
background image

Power Steering Pump: Procedures

AR46.30-P-0010A Filling and Bleeding Power Steering Pump

Filling And Bleeding Power Steering Pump

Left Side

Right Side

CAUTION: Under no circumstances should the power steering pump draw in air.

NOTE:  If air is drawn in by the power steering pump an air cushion may form in the low pressure chamber of the steering gear which is only
eliminated after a longer trip (> 50 km)

1

Fill up reservoir of power steering pump to approx 10 mm below upper edge of reservoir

2

Start engine 2-3 times.

NOTE:  The steering system bleeds itself automatically

3

Turn the steering from lock to lock several times with the engine running, meanwhile topping up with MB steering gear fluid if necessary.

4

Power steering - check and correct fluid level

5

Check steering system for leaks

NOTE:
-

A slight fluid film on the radial shaft sealing ring or on the contact face of the housing is due to the design

-

If the fluid level is too low, establish and eliminate the cause.

Application and ID

Application and ID

Procedures|Page 6159 > < Standard Pump|Page 6156