SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-1980005.png)
-
With steering gear removed, unscrew P-valve (Y10). Absolute cleanliness is required.
-
Replace the seal (Y10/1).
-
Torque to 70 Nm on installation.
Remove, Install & Check Bearing Cover w/ Pitman Arm Shaft
Steering Gear with Adjusting Screw Below:
-
Pay attention to "Important Notes Regarding Repair of Steering Gear"
-
Remove steering gear from vehicle if not already done.
-
For special tool information, See: Tools and Equipment
Removal:
