mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
AR35.20-P-0130B Remove/Install Rear Axle Shaft Flange and Angular Ball Bearing|Page 6656 > < AR35.20-P-0130B Remove/Install Rear Axle Shaft Flange and Angular Ball Bearing|Page 6654

SL 600 (129.076) V12-6.0L (120.983) (1997)

Page 1
background image

Wheel Hub: Service and Repair
Wheel Carrier With Bearing

Wheel Carrier (Hub)

Wheel Carrier (Hub)

PREPARATION

Remove the hub assembly with bearings

REMOVAL 

1. Remove outer tapered roller bearing (9c) from front wheel hub (9)

2. Drive inner tapered roller bearing (9l) and radial sealing ring (9a) out of front wheel hub using drift (05a) tool No. 202 589 00 15 00, or equivalent

3 Remove outer race of inner tapered roller bearing (9b) from front wheel hub using puller (06) tool No. 201 589 00 33 00, or equivalent

AR35.20-P-0130B Remove/Install Rear Axle Shaft Flange and Angular Ball Bearing|Page 6656 > < AR35.20-P-0130B Remove/Install Rear Axle Shaft Flange and Angular Ball Bearing|Page 6654