SL 600 (129.076) V12-6.0L (120.983) (1997)
Shifter A/T: Removal and Replacement
AR27.60-P-0900B Remove/Install Floor Shift
Remove/install floor selector
Remove/install
1
Remove shift rod at intermediate lever (97)
NOTE: Remove clip retainer.
-
If adjusting: Adjust shift rod.
2
Remove center console
3
Remove insulation mat
-
Model 163
4
Unscrew hexagon socket bolts (40)
5
Disconnect couplings
NOTE: From gear identification switch (S16/10), reverse lamp switch (S16/10s2) and R/P lock electromagnetic actuator (Y66/1).
6
Remove floor selector
NOTE:
-
Disassemble and assemble floor shift according to condition.
-
Installation: Check gasket (39) for correct installed position and condition, replace if necessary.
7
Install in the reverse order
NOTE: After installing the floor shift, read out fault code using HHT and erase, refer to DM Chassis Volume 1 - Index 0.
68-230 Remove/Install Gear Shift Lever Cover
68-230 Removal And Installation Of Gear Shift Lever Cover