SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-1493001.png)
Wheel Bearing: Adjustments
PREPARATION
Raise and support the vehicle, then remove the wheel
ADJUSTING
1. Fasten brake disk to front wheel hub
-
To do this, screw in a wheel bolt (43a) 180° opposite the locking bolt (9k)
2. Press brake pads off brake disk
3. Pull hub cap (9e) off wheel hub using puller (023) tool No. 116 589 22 33 00, or equivalent
4. If equipped, remove contact spring for radio interference suppression (arrow)
