mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
AR54.65-P-0001R Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 17495 > < AR54.65-P-0001R Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 17493

SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)

Page 1
background image

Parking Assist Distance Sensor: Service and Repair
AZ54.65-P-0001-06R Route Wiring Harness and Connect

AZ54.65-P-0001-06R Route Wiring Harness And Connect

Component Identification

1. Route ultrasonic back-up assist wiring harness (1) to cable passage (see arrow) starting at ultrasonic back-up assist control module (62) and fasten.
2. Connect ground tieout to ground (left wheelhouse in trunk) (W58).

3. Insert 18-pin connector (see arrow) into ultrasonic back-up assist control module (62).

The connector is coded and therefore protected against polarity reversal.

4. Route tie-out with 6-pin connector for ultrasonic PTS rear bumper connector (X35/29) to cable passage (d).

AR54.65-P-0001R Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 17495 > < AR54.65-P-0001R Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 17493