mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

TV Tuner, Location/Task/Design|Page 17775 > < TV Tuner, Location/Task/Design|Page 17773
Page 2
background image

Component Identification

TV mode

The LCD color display of the COMAND operating, display and control module (A40/3) is used for television reception.
TV reception is possible up to approx. 8 km/h and can be activated with the present TV button
Moreover, the system can be controlled from all seats with an infrared remote control. The TV tuner (A2/42) is installed in the rear on the left side.

The audio signals are preamplified by the COMAND operating, display and control module (A40/3) and the required tone settings (volume, bass, treble
and fader) are made.

TV mute, function

The mute function of the audio sources is maintained when it was activated before switching off.

Displaying mute status on the TV screen

If mute is set, a symbol appears in the top right of the display. It is necessary for the mute status to be transmitted to the TV tuner (A2/42) with a newly
generated command so that the mute status can be displayed on the TV screen.

The setting which was performed last before switching off the ignition, is adopted when the ignition is switched on again.

TV tuner system

The TV tuner (A2/42) supplies the video and audio information which is reproduced by the COMAND operating, display and control module (A40/3).

TV tuner components and functions

TV Tuner, Location/Task/Design|Page 17775 > < TV Tuner, Location/Task/Design|Page 17773