mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

TV Tuner, Location/Task/Design|Page 17778 > < TV Tuner, Location/Task/Design|Page 17776
Page 5
background image

then via direct lines to the following speakers:

-

Left door speaker group (H4/1)

-

Right door speaker group (H4/2)

-

Left rear speaker (H4/7)

-

Right rear speaker (H4/8)

-

Center cockpit speaker (centerfill) (H4/27)

-

Subwoofer speaker (H4/29)

The audio signal for the subwoofer speaker travels from the COMAND operating, display and controller unit via MOST to the amplifier for sound
system and from there, via direct lines over the subwoofer amplifier (N40/9) and then to the subwoofer speaker.

On vehicles except code (810) Sound system, the audio signals and data are output by the COMAND operating, display and controller unit over direct
lines to the following speakers:

-

Left door speaker group

-

Right door speaker group

-

Left rear speaker

-

Right rear speaker

Supplemental information

The supplemental information is subdivided into the following categories:

^

TV reception

^

Additional functions

TV reception

TV reception is subdivided into 2 subcategories:

-

Analog TV reception

-

Digital TV reception

Analog TV reception

The TV tuner receives and processes terrestrial analog television programs, which have been broadcast in all standards. The audio quality is limited to
"MONO". The TV system operates with a total of 3 reception modules for video and audio signals. The PLL tuners used cover a reception range of 30 to
866 MHz. The TV combination tuner supports reception of the "PAL/SECAM" and "NTSC" TV standards. The TV combination tuner has 4 antenna
inputs for the TV signals from the various antenna amplifier modules. The antennas are not assigned to any particular tuner, but rather can be used by
each tuner in identical manner.

Digital TV reception

In addition to analog television stations, it is also possible to receive terrestrial television stations broadcasting digital signals with the antenna structures
already present. The Digital Video Broadcasting Terrestrial (DVB-T) standard is supported. In contrast to analog TV, the audio can be received in stereo
here. Switch over from analog to digital TV reception is accomplished by the TV combination tuner automatically, depending on the current reception
status. It is not possible for users to switch over themselves. However, switchover between alternative channels as well as between analog and digital
reception can be prevented with the "Fix channel" control function. If stations with matching stations names are received (e.g. ARD analog and digital),
only one entry is made in the list of stations.

DVB-T allows more programs to be received in better quality with a common antenna, including portable, depending on the reception.

Additional functions

The TV combination tuner provides the following features:

-

Video text (pages: 100 to 899)

-

Station list of channels momentarily receivable

-

Digital image storage

-

Last settings

-

National settings

Videotext function

Some stations, primarily in central Europe, offer videotext in addition to their television program. For this purpose, the TV combination tuner is
equipped with a separate video text decoder. Only videotext broadcast with Latin ASCII characters are supported, i.e. Greek or Cyrillic characters are
not supported.

TV Tuner, Location/Task/Design|Page 17778 > < TV Tuner, Location/Task/Design|Page 17776