SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
GF54.21-P-4112-01R Rear SAM Control Module With Fuse and Relay Module Task
GF54.21-P-4112-01R Rear SAM Control Module With Fuse And Relay Module Task
- up to model year 08
The SAM control unit in the rear (N10/8) has the following tasks:
Controlling
^
or trunk lighting
^
the lighting of the rear boxes
^
the rear lighting
^
processing the gas tank level
^
The rear window defroster
Scanning the following switches:
^
Switch tumbler detent (S88/4)
^
Switch tumbler (S88/4s1)
^
switch detent (S88/4s2)
^
Left front door contact switch (S17/3)
^
Right front door contact switch (S17/4)
^
Electronic alarm system switch right rear box (S62/34)
Electronic alarm system switch left rear box (S62/33) Electronic alarm system switch for middle console compartment (S62/32)
Scanning the fuel level sensor (B4)
The resistance valve of the fuel level sensor (B4) is scanned every 255ms.The resistance value is ordered to a procent value that is averaged with the
previous value and stored in the passenger compartment CAN
Scanning the following signals:
^
Transmission and receiving units in the passenger compartment (A26/14)
^
ATA [EDW] inclination sensor (B33)
Switching loads via semiconductor switches:
^
Lighting on the rear outside lights
^
Trunk lighting (E18/1)
^
Turn signal rear left
^
Turn signal rear right
Values :
^
Term. 15
^
Term. 50
Switches in the following relays:
^
Relay 1, Terminal 5R (N10/2kQ)
^
Relay 2, Terminal 15R (N10/2kM)
^
Rear window defroster relay (K40/5kU)
The SAM control unit in the rear (N10/8) is connected to the passenger compartment CAN for the exchange of data.
GF54.21-P-4112R Rear SAM Control Module With Fuse and Relay Module, Location/Task/Design
GF54.21-P-4112R Rear SAM Control Module With Fuse And Relay Module, Location/task/design