SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
/v12-5.5l_turbo_(275.951)/Page-4257002.png)
Rear axle carrier
Component Identification
1
Remove brake caliper (31) and, with brake lines attached, hook up to one side.
2
Remove suspension struts (41) from spring control arms (6).
3
Support rear axle center assembly (50) using transmission jack and transmission platform, and lash securely.
4
Remove bolts (1c, 1d).
Installation: Recut thread in frame floor assembly and blow out. Replace bolts.
5
Lower rear axle no more than 50 mm.
Do not apply tension to brake cables and lines.
