SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
/v12-5.5l_turbo_(275.951)/Page-2491007.png)
The SBC module box (A, Figure 3) must be positioned in a location where the adapter cable (B, Figure 2) cannot come into contact with
rotating engine parts.
9.
Disconnect engine wiring harness connector (arrow, Figure 4) from SBC control module (A).
10.
Connect and lock 15/47-pin adapter cable connector (A, Figure 5) to engine wiring harness connector (B).
11.
Connect and lock 15/47-pin adapter cable connector (C, Figure 5) to SBC control module (D) connector.
12.
Press F2.
13.
Connect SDS and SBC module:
