SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
/v12-5.5l_turbo_(275.951)/Page-2485035.png)
Note
^
The cable tie buckle (C) must not touch the bracket (B).
^
When attaching SBC wire harness (A) to the bracket (B), ensure that the wire harness (A) touches the bracket (B) and is mounted there tension free.
^
After the SBC cable (A) is secured, it must no longer be possible to move it in the longitudinal direction toward the bracket.
^
Disregard WIS notes regarding torque settings on cable tie pliers. Use settings specified in this step.
CAUTION!
Ensure harness is properly mounted to allow cable strain relief in area between cable tie and connector.
22.
Proceed to SUBJECT C - QUALITY ASSURANCE MEASURES.
C. Quality Assurance Measures - Model 230
CAUTION!
Check the quality measures outlined below after completing the service procedure.
1.
Quality measure 1:
^
Ensure cable tie (arrow, Figure 22) was properly affixed using cable tie pliers (Hellermann MK9; special tool number W 352 589 02 37 00);
use setting 3 on cable tie pliers, as shown in Figure 23.
