SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
/v12-5.5l_turbo_(275.951)/Page-2505027.png)
3.
Disconnect SBC hydraulic unit harness connector (arrow, Figure 2a) from SBC hydraulic unit (A) and remove cable tie (B, Figure 3).
4.
Detach the SBC hydraulic unit ground wire harness (arrow, Figure 3) at ground terminal stud (A).
5.
Position SBC harness connector (arrow, Figure 2a) away from SBC hydraulic lines to prevent brake fluid from dripping on SBC harness connector
and SBC wiring harness.
6.
Remove omega (arrows, Figure 4) hose clips from SBC hydraulic unit bracket (A).
7.
Remove SBC hydraulic unit refer to WIS: AR42.46-P-0010R steps 1 - 3, 5 - 14.
8.
Inspect which version of the suction hose is installed on the SBC hydraulic pump:
