mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Recall - Inspect/Replace SBC Hydraulic Control Unit|Page 11218 > < Sensotronic(R) Brake Control Unit - Service Precautions
Page 1
background image

Technical Service Bulletin # 2005070007E

Date: 060505

Recall - Inspect/Replace SBC Hydraulic Control Unit

FILE: 
SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER
PARTS: GROUP I OF INFORMATION - PARTS & ACCESSORIES BINDER

Campaign No. 2005070007, May 2006

Revision History

Revision

Date

Purpose

E

05/05/06

Update of warranty information for SBC unit replacement

D

04/05/06

Addition of 3 new non-campaign damage codes for SBC unit replacement

C

01/12/06

Update of SBC connector information and clarification of SBC unit part numbers

B

12/06/05

Addition of Quality Assurance measures; update of work instructions and warranty

A

08/29/05

Breakdown of parts into primary and secondary; addition of replacement rates

-

08/02/05

Initial issue

TO: ALL MERCEDES-BENZ CENTERS

SUBJECT: 
MODELS 211, 230

MODEL YEAR:
2004

INSPECT SBC HYDRAULIC UNIT, REPLACE AS DIRECTED

This Recall Campaign has been initiated because DCAG has determined that on the affected vehicles (see VIN range below) the SBC brake system may
shift to the hydraulic back up mode due to the loosening of the ground wire harness connection over time, or due to premature failure of the hydraulic
pump. On Model 211 dealers will install a bracket and replace the ground wire, and if required, replace the hydraulic pump and suction hose. On Model
230, dealers will install a bracket and replace the ground wire, replace the suction hose, and if required replace the hydraulic pump.

Note:

This recall campaign has been divided into two parts:

I MODEL 211
INSPECT SBC HYDRAULIC UNIT, REPLACE AS DIRECTED 

II MODEL 230
INSPECT SBC HYDRAULIC UNIT, REPLACE AS DIRECTED 

Note:

With the launch of this campaign, 211 and 230 vehicles subject to last year's SBC Recall Campaign No. 2004050014 that have not been repaired to
date have been excluded from last year's campaign and will no longer appear in VMI as an "Open" campaign. All vehicles subject to last year's SBC
recall, both "Open" and "Closed" will be campaigned under this year's SBC campaigns.

Recall - Inspect/Replace SBC Hydraulic Control Unit|Page 11218 > < Sensotronic(R) Brake Control Unit - Service Precautions