SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
/v12-5.5l_turbo_(275.951)/Page-2512031.png)
^
Install the new SBC suction hose mounting clip (arrow, Figure 11) onto the mounting stud.
Note:
To gain better access to mounting clip (during installation); remove the plastic cover over the right head lamp; then tap the clip into place using
a socket extension and plastic mallet.
10.
Remove cable tie (left arrow, Figure 12) securing ground wires (A) to SBC connector housing (B).
11.
Remove cable tie (right arrow, Figure 12) securing SBC wire harness (C) to SBC connector housing (B).
