SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
/v12-5.5l_turbo_(275.951)/Page-2659033.png)
^
Torque mounting clamp screw (C) to 5 Nm while pressing bracket (B) onto SBC unit (A).
17.
Insert a cable tie through slots (C, Figure 16) in bracket (A), do not close cable tie.
Note:
Cable tie installation shown on "bolt-on" type mounting bracket, cable tie installation for clampon type bracket is similar
18.
Connect the SBC wire harness connector (Arrow, Figure 19) to the SBC hydraulic unit and secure with connector locking mechanism.
19.
Attach the ground wire harness ring connector (A, Figure 20) to the body ground terminal (B) with M6 nut. Torque the M6 nut to 10 Nm.
