SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
/v12-5.5l_turbo_(275.951)/Page-2665029.png)
9.
Replace suction hose (A, Figure 7):
^
Open the suction hose mounting clip (arrow) and remove suction hose (A) from bracket. Remove mounting clip (arrow) from threaded stud
and discard.
^
Remove hose clamp (A, Figure 8) then remove suction hose (arrow) from suction line (B) using a plastic wedge (Example: Special Tool:
W110 589 03 59 00).
CAUTION!
^
Do not use sharp-edged tools (e.g., screwdriver) to remove suction hose (arrows, Figure 8) from suction line (B), as this may cause damage
to the SBC brake system.
Note:
^
When removing suction hose (arrow), do not bend suction line (B).
