SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
/v12-5.5l_turbo_(275.951)/Page-2665032.png)
12.
Remove SBC connector housing cover (A, Figure 13):
^
Using a small screw driver, carefully pry cover (A) away from locking lugs (arrows) until cover (A) disengages.
^
Repeat the process on opposite side.
^
Remove the cover (A) from the housing (B).
Note:
There are two different versions of the SBC wiring harness connector (Figures 14 a, b) installed in vehicles involved with this campaign.
13.
Open the (gray) secondary lock in the SBC connector housing (A, Figure 15) by sliding the lock in the direction indicated by the arrows (Figure
