SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
/v12-5.5l_turbo_(275.951)/Page-2728029.png)
11.
Close the (gray) secondary lock of the SBC connector housing (A, Figure 12) by sliding the lock in the direction indicated by the arrows (Figure
12) using a small screwdriver until it locks into place.
12.
Reinstall the SBC wire harness connector cover in reverse order.
Note:
Ensure the locking lugs (arrows, Figure 7) on the harness connector are properly engaged into the harness connector cover.
13.
Secure SBC wiring harness (A, Figure 13) (excluding ground wires) to the SBC connector cover harness receptacle (arrow) using a new cable tie
