SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
/v12-5.5l_turbo_(275.951)/Page-1242002.png)
6
Detach sleeve (2).
The crankshaft radial sealing ring must be positioned at right angles to the crank journal otherwise proper sealing is not assured.
Shown on engine 112
Component Identification
Repair size 1 is identified by a 3 mm wide shoulder on the contact surface.
7
Turn sleeve (2) and push onto the crankshaft with side of repair size 1 (b).
Turn to ensure that the slot in the sleeve (2) is aligned with the Woodruff key in the crankshaft.
8
Draw in sleeve (2) with central bolt (3) as far as the stop.
9
Detach sleeve (2).
Shown on engine 112
Component Identification
10
Check installation location of the crankshaft radial sealing ring (1) to the crank pin (4).
The crankshaft radial sealing ring (1) must be positioned at right angles to the crank journal (4) otherwise proper sealing is not assured.
The installation depth (B) of the crankshaft radial sealing ring (1) is preset through the sleeve (2) and must not be altered subsequently.
Shown on engine 112
