SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
Evaporator Core: Removal and Replacement
AR83.30-P-5540R Remove/Install Evaporator
1
Remove AC housing
2
Push up support (1) on evaporator housing
3
Unclip clamp (2) and withdraw sliding clamp (3)
4
Unplug electric connector (4) from actuator motor
5
Remove tie straps (5) on evaporator housing
6
Fold down right-hand side of evaporator housing and remove
7
Remove screw (6) on bracket (7) of coolant pipe and remove bracket (7)
8
Remove coolant pipe sealing (8)
9
Unclip clamps on housing base (9)
NOTE: Turn evaporator housing, until housing base is accessible.
10
Remove housing base
11
Remove evaporator (10)
12
Install in the reverse order