SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
-
Bolt of crossmember to body: 20 N.m
-
Bolt, crossmember to transmission tunnel bracket: 20 N.m
21
Draw water drainage hoses out of transmission tunnel
NOTE: Installation: Ensure that it is correctly seated.
22
Remove AC housing
NOTE: Installation: Replace sealing strip for air intake support when damaged.
23
Install in the reverse order
NOTE: Evacuate and charge air conditioning after installing the fluid reservoir. When doing so feed in new compressor oil to the refrigerant
circuit; note the oil quantity. Check air conditioning refrigerant circuit for signs of leaks.
24
Remove and install fluid reservoir
CAUTION: Generally the fluid reservoir should be replaced when the refrigerant circuit has been opened.