SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
/v12-5.5l_turbo_(275.951)/Page-4898006.png)
GF82.20-P-2033R Switch Dome Lamps On/Off, Function
Component Identification
Switching dome lamp on/off manually:
When the dome lamp on/off switch (N70s4) in the overhead control panel (N70) is pressed, the dome lamp (N70e1) is switched on dimmed.
The lamp is switched off from the dimmed position by resetting this switch or automatically 30 minutes after no activity on databus to minimize the drain
on the battery.
If the lamp has been switched on , it is not possible to manually perform any of the automatic functions explained below.
Requirements for automatic functions:
^
automatic headlamps on control is switched on at instrument cluster (A1) and
^
switch for door contact ON and OFF (N70s3) is switched on (switch rocker is in center position) and
^
lights on sensor has detected night
or
^
automatic headlamps on control is switched off at instrument cluster (A1) and
^
switch for door contact ON and OFF (N70s3) is switched on (switch rocker is in center position)
Automatic functions of dome lamp
^
When a door is opened , the dome lamp (N70e1) is switched on dimmed.
it is switched off:
^
if circuit 15 ON: dimmed immediately after the last door is closed or automatically 30 minutes after the last front door is opened.
^
if circuit 15 OFF: dimmed 8 s after the last door is closed or automatically 5 minutes after the last door is opened.
^
If the vehicle is unlocked, the dome lamp is switched on dimmed.
it is switched off:
^
dimmed 30 s after unlocking
^
If the ignition key is withdrawn , the dome lamp (N70e1) is switched on dimmed.
It is switched off automatically after the delayed-off time of the interior light is set at the instrument cluster (A1). (Possible settings are 0 s, 5 s, 10
s, 15 s und 20 s.)
^
If circuit 15 is switched on while an automatic light function is active, the dome lamp is switched off dimmed immediately.
^
If there is a change to the requirements (position of door contact on/off switch or light sensor information) during an automatic function, this
