SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
1
Clean the area around the threaded insert (50a).
2
Unscrew union nut (50c).
3
Remove fitting (50b) from threaded insert (50a).
4
Remove threaded insert (50a).
5
Clean threaded insert (50a) and threaded hole in differential.
The threaded insert (50a) and threaded hole must be free from oil and grease.
6
Coat about one droplet of sealant on the second or third thread of the threaded insert (50a).
7
Screw the threaded insert (50a) into the differential immediately and tighten to the specified torque.
8
Screw the fitting (50b) into the threaded insert and tighten to the specified torque
Install new seal (2).
9
Screw on union nut (50c) and tighten to the specified torque.
Install line free of tension.