mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AR54.21-P-1259R Remove/Install SAM With Fuse and Relay Box, Rear|Page 7373 > < GF54.21-P-4109-01R Driver SAM Control Unit With Fuse and Relay Modules, Task|Page 7370
Page 1
background image

Body Control Module: Service and Repair
AR54.21-P-1259R Remove/Install SAM With Fuse and Relay Box, Rear

AR54.21-P-1259R Remove/Install SAM With Fuse and Relay Box, Rear

- except CODE (P99) "AMG Black Series" special model

1

Remove right luggage box

NOTE:  Place luggage box to the side with lines connected.

DANGER:
-

Risk of explosion from electrolytic gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury with
caustic burns to eyes and skin from battery electrolyte or from handling damaged lead-acid batteries

-

No fire, sparks, naked flames or smoking. Wear acid-resistant gloves, clothing and eye protection. Pour battery electrolyte only into
suitable and appropriately marked containers.

2

Disconnect ground cables from batteries

NOTE:  First the on-board electrical system battery in the trunk and then the starter battery in the engine compartment.

3

Unscrew nuts (1)

4

Pull out rear SAM control module (N10/8) with rear fuse and relay module (K40/5) upwards

5

Unlock and disconnect electrical connections (2)

6

Unlock and remove fuse holder (3)

NOTE:  Observe installed position, which is indicated by color coding and design.

7

Unlock and disconnect electrical connections (4)

8

Remove rear SAM control module (N10/8)

9

Install in the reverse order

AR54.21-P-1259R Remove/Install SAM With Fuse and Relay Box, Rear|Page 7373 > < GF54.21-P-4109-01R Driver SAM Control Unit With Fuse and Relay Modules, Task|Page 7370