SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
Special Tools
The measuring set is designed in such a way, that the measuring bolts, according to the measuring points at the vehicle, can be screwed together out of
mounting bolts, extensions and measuring tips/bolts.
The configuration of the measuring bolts is shown in the table, where the digits in the column headed "Measuring bolt configuration" are the special
tool end numbers. For example: 02/08/10 168 589 07 63 02 (support stud) 168 589 07 63 06 (extension) 168 589 07 63 10 (measuring tip)
Component Identification
1
Measure comparative measurement (V1) from the check point (K) to the cast surface on the torque strut (18). Measure on the left and right side in
each case.