mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AP41.10-P-4152Z Propeller Shaft - Checking Couplings For Damage|Page 10207 > < AP41.10-P-4152Z Propeller Shaft - Checking Couplings For Damage|Page 10205
Page 2
background image

Measured Values Screen For Angle 2: Display E.G. 2.18 Degrees

The value measured is shown on the display.

3

Press SAVE button. The values are saved.

Confirmation Screen

Measured values screen for angle 2: e.g. 2.18 degrees

A confirmation message appears briefly.

Confirmation screen

Ready Screen For Angle 3

The display then indicates that the device is ready for the next measurement (angle 3).

4

Remove sensor (020a) from front propeller shaft (1).

Ready screen for angle 3

AP41.10-P-4152Z Propeller Shaft - Checking Couplings For Damage|Page 10207 > < AP41.10-P-4152Z Propeller Shaft - Checking Couplings For Damage|Page 10205