SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
2.
Move Vario roof to intermediate position and secure (See WIS-document AR77.50-P-3000-01R).
Use Special Tool "Support".
3.
Mask upper C-pillar.
4.
Spray below outer C-pillar seal (area A-B-Figure 16).
Do not loosen glue and remove sealant running out. Use sealant gun and window sealant for dabbing.
5.
Perform leakage test.
If leakage still exists:
Replace seal on outer upper section of C-pillar for Vario roof (See WIS-document AR77.50-P-6766R).
VII. Water Leak in Area of Rear Window
VII. Penetration by water into rear window area