SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
Water drops at rotation point (C-Figure 19) of rear window.
1.
Perform rain test.
2.
Move Vario roof to intermediate position and secure (See WIS-document AR77.50-P-3000-01R).
Use Special Tool "Support".
3.
Check electric cable routing, correct if necessary.
In the event of cable excess, slide cable harness downward in cable duct.
4.
Apply Special sliding roof lubricant to bottom of wedge (A-Figure 20, magnified section).
5.
Fasten funnel (B-Figure 20, magnified section) to C-pillar with glue.
Dotted line.
6.
Reinstall in opposite order.
7.
Perform leakage test.
Procedure/Cause 3:
^
C Rotation point
Procedure/Cause 3:
^
A Wedge
^
B Funnel
Cause 4:
Seal of upper side rear window corner to rear window frame leaky.
Procedure:
Seal seal of upper side rear window corner to rear window frame.
1.
Perform rain test.
2.
Move Vario roof to intermediate position and secure (See WIS-document AR77.50-P-3000-01R).