SL 600 (230.476) V12-5.5L Turbo (275.951) (2004)
/v12-5.5l_turbo_(275.951)/Page-5097003.png)
Install window (3) on body flange (4) within 10 minutes after applying adhesive material (1), otherwise adhesive force of glue (1) starts to decrease.
Completely press out remaining glue not required (disposal) Use adapter from 1-component repair kit to completely press out cartridge. Insert adapter
between cartridge piston and plate on cartridge gun push rod.
Shown on body flange on model 230.4
Component Identification
1.1 Guide application nozzle (2) along body flange (4) and uniformly apply glue (1).
Not on model 208.3.
Component Identification
1.2 Guide application nozzle (2) to inside of window (3) along rubber profile (5) and uniformly apply glue (1).
Only on model 208.3.
AR67.10-P-1000-11SX Cut Out Windows With Roll Out
AR67.10-P-1000-11SX Cut Out Windows With Roll Out