mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 14775 > < Procedures|Page 14773
Page 3
background image

On vehicles with Parktronic system (PTS), code 220, ensure that PTS wiring harness is routed correctly. The routing is defined in the impact
absorbers.

10. Insert left and right basic carriers (17) into front bumper cover (1).

Ensure that the left and right basic carriers (17) are installed properly on the retaining lugs (8).

11. Fasten left and right basic carriers (17) at top of front bumper cover (1) with 6 expansion rivets (19) (see left bottom picture).
12. Fasten left and right basic carriers (17) in center on front bumper cover (1) with 2 expansion rivets (19) (see top right picture).
13. Insert spacers sleeves (36) at top left and right in left and right basic carriers (17) and front bumper cover (1) (see top left picture).

14. Install left and right impact absorber (29) removed from standard bumper into left and right basic carriers.

On vehicles with Parktronic system (PTS), code 220, ensure that PTS wiring harness is routed correctly. The routing is defined in the impact
absorbers.

Procedures|Page 14775 > < Procedures|Page 14773