SL 600 (230.477) V12-5.5L Turbo (275.954) (2007)
Air Door Actuator / Motor: Service and Repair
AR83.10-P-2003R Remove/Install Actuator For Right Blend Air Flap
AR83.10-P-2003R Remove/Install Actuator For Right Blend Air Flap
1
Remove evaporator housing
2
Push the evaporator housing support (1) out upwards
3
Unclip the clamps (2) and pull sliding clamp (3) out
4
Disconnect the electrical connector (4) from the fresh and recirculated air flap actuator motor
5
Remove tie straps (5) at evaporator housing
6
Fold the right section of the evaporator housing down and separate
7
Disconnect the electrical connector at the right blending air flap actuator motor (M16/29)
8
Remove blending air flap actuator motor (M16/29)
9
Install in the reverse order
10
Read out fault memory.
11
Normalize actuator motor.