SL 600 (230.477) V12-5.5L Turbo (275.954) (2007)
/v12-5.5l_turbo_(275.954)/Page-2975002.png)
5
Unscrew oil cooler screw (4) at condenser and place oil cooler to the side
6
Remove condenser (1)
7
Install in the reverse order
NOTE: Evacuate air conditioning and charge after installing the fluid reservoir. In this case, feed new compressor oil into the refrigerant circuit,
observe the noted oil quantity.
-
On replacement of the condenser
Fill the additional quantity of compressor oil into the air conditioning system's refrigerant circuit: 30 cu.cm
8
Remove and install fluid reservoir
CAUTION: The fluid reservoir generally has to be replaced if the refrigerant circuit has been opened.
9
Correct steering fluid level.
Special Tool
Special Tools
