mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF54.35-P-0001-01R Fanfare Position of Components|Page 17230 > < GF54.35-P-0001-01R Fanfare Position of Components|Page 17228
Page 1
background image

Horn: Description and Operation
GF54.35-P-0001R Fanfare Horns, Function

GF54.35-P-0001R Fanfare Horns, Function

- up to model year 08

15.03.07

The document has been updated to this date and will no longer be subject to revision.

Function requirements

^

Circuit 15: ON

Function:

^

When the impact absorber on the multifunction steering wheel is pressed, one or more buttons for the fanfare horns (S110s5, S111s5) are actuated.

^

The status of these buttons is read in by the steering column module (N80).

^

The steering column module (N80) sends a corresponding message on the interior CAN.

^

This message is received by the passenger-side SAM control unit (N10/11).

^

The passenger-side SAM control unit (N10/11) actuates the relay for the fanfare horns (K40/4kP). This relay is located on the passenger-side fuse
and relay module (K40/4).

^

The relay for the fanfare horns (K40/4kP) connects the two fanfare horns (H2, H2/1) to circuit 30.

^

The signal sounds as soon as at least one of the buttons (S110s5, S111s5) is actuated.

Actuation of the fanfare horns (H2, H2/1)
One line of the fanfare horns (H2, H2/1) is always connected to ground, actuation is therefore accomplished by connecting to circuit 30 (via K40/4kP).

Control of the relay for the fanfare horns (K40/4kP)
The relay coil for the fanfare horns (K40/7kP) is permanently connected to circuit 15; when the fanfare horns (H2, H2/1) are actuated, the other
connection is connected to ground via the passenger-side SAM control unit (N10/11).

Buttons for the fanfare horns (S110s5, S111s5)
Four buttons for the fanfare horns (H2, H2/1) are located on a circuit board below the impact absorber of the multifunction steering wheel. This ensures
that the fanfare horns can be actuated from any point on the impact absorber. The two right and the two left buttons are each connected in parallel. They
are read in voltage-coded by the steering column module (N80) together with the buttons of the left and right multifunction steering wheel button groups
(S110, S111). See also applicable wiring diagrams.

GF54.35-P-0001-01R Fanfare Position of Components|Page 17230 > < GF54.35-P-0001-01R Fanfare Position of Components|Page 17228