SL 65 AMG (230.479) V12-6.0L Turbo (275.981) (2005)
/v12-6.0l_turbo_(275.981)/Page-3685001.png)
Antenna, Phone: Description and Operation
GF82.62-P-4105-01R Telephone Antenna, Location
GF82.62-P-4105-01R Telephone Antenna, Location
Component Identification
GF82.62-P-4105-02R Telephone Antenna, Purpose
GF82.62-P-4105-02R Telephone Antenna, Purpose
- with CODE (498) Japan version
- with CODE (349) E Call emergency call system
The telephone antenna (A2/22) transmits and receives telephone signals (data and voice information). In addition to this the telephone antenna (A2/22)
receives the signal of the STH radio remote control sender (A8/3) for the radio remote control transmitter unit (A6/1) of the stationary heater (code 228).
The received signals are transmitted to the telephone/portable CTEL/STH radio remote control antenna splitter (A2/53) via the antenna cable.
From there the edited signals are relayed to the corresponding receiver:
^
STH remote control receiver unit (A6/1),
^
Via the telephone interface (A34/4) to the portable CTEL (A34/6),
^
Telephone transmitter/receiver, D2B (A35/13).
GF82.62-P-4105-02RA Telephone Antenna, Purpose
GF82.62-P-4105-02RA Telephone Antenna, Purpose
- with CODE (386) Preinstallation for telephone "Handy", UPCI system
- with CODE (388) Telephone "Handy", UPCI system
The telephone antenna (A2/22) telephone transmits and receives signals (data and voice information). In addition, the telephone antenna (A2/22)
receives the signal of the STH radio remote control transmitter (A8/3) for the radio remote control receiver (A6/1) of the stationary heater (code 228).
The received signals are routed via the antenna cable to the telephone/cell phone/STH radio remote control antenna splitter (A2/53). From there, the
processed signals are forwarded to the corresponding receivers:
^
STH radio remote control receiver (A6/1),
^
via the E-net compensator (A28/3) to the Universal Portable Cell Phone Interface (UPCI [UHI]) control unit (N123/1),
USA only
^
via the frequency change-over control unit (N96) to the emergency call system control unit (N123/4).
