SL 65 AMG (230.479) V12-6.0L Turbo (275.981) (2005)
Scuff Plate: Removal and Replacement
AZ82.20-P-0001-01R Fit Illuminated Door Sill Molding
AZ82.20-P-0001-01R Fit Illuminated Door Sill Molding
1
Drill 6 mm dia. hole at marked point (see arrow) through bead on frame floor system (FFS) and treat with corrosion protection agent.
Do not damage carpeting in vehicle.
2
Secure connection cable for the lamp foil to the underside of the illuminated door sill molding (1) with adhesive tape (2) (see figure on left).
3
Open connector housing (5) at connection wire of illuminated door sill molding and pull out wires.
4
Route connection lead for illuminated door sill molding (1) to passenger compartment through bore hole (see arrow) and insert into connector
housing (5).
Use clamps as required.
5
Clip in illuminated door sill molding (1).
AZ82.20-P-0001-02R Connect Wiring Harness
AZ82.20-P-0001-02R Connect Wiring Harness