SL 65 AMG (230.479) V12-6.0L Turbo (275.981) (2005)
Interior Light Switch: Description and Operation
GF82.20-P-2022R Switch Entry/Exit Lamps On/Off, Function
GF82.20-P-2022R Switch Entry/exit Lamps On/off, Function
Component Identification
An entry/exit lamp is located at the bottom edge of each door.
Function requirements:
^
The overhead control panel control module (N70) has detected "night" through the lights on sensor (B32/1).
^
Door contact ON and OFF switch (N70s3) in ON position
^
no undervoltage or overvoltage
In general only entry/exit lamps of opened doors are actuated.
Switching entry/exit lamps on:
^
An entry/exit lamp is switched on as soon as the appropriate door is opened.
Switching entry/exit lamps off:
^
The entry/exit lamp is switched off if the appropriate door is closed.
The lamp is automatically switched off if the door remains open for more than 5 minutes.
Switching on again after automatic switch-off
The on period is extended or started once again if:
^
a change of status occurs at any door contact switch (S17/3, S17/4),
^
circuit 15 is switched on,
^
the vehicle is locked or unlocked.
Actuation
The entry/exit lamps are actuated by the relevant door control module (N69/1, N69/2).
The door control modules require the following CAN messages for this purpose:
^
The ambient intensity ; this message is generated (night/day) with the data of the lights on sensor (B32/1) in the overhead control panel (N70).