SLK 230 (170.447) L4-2.3L SC (111.973) (2000)
/l4-2.3l_sc_(111.973)/Page-1392001.png)
Crankshaft Position Sensor: Service and Repair
Remove, Install Crankshaft Position Sensor
Left-hand Fig, Engine 104
Right-hand Fig, Engine 111 In Model 210
Engine 111 In Model 163, 170, 202, 208
Work instructions
NOTE: Remove starter.
L5 Crankshaft position sensor
NOTE:
-
Perform re-initializing of ME control module
-
Re-initializing must only be performed with
-
Star Diagnosis in the menu point "Control module adaptation" if the crankshaft position sensor has been replaced.