SLK 230 (170.449) L4-2.3L SC (111.983) (2001)
1. Replace left and right camshaft solenoids (A, Figure 7): Refer to WIS: AR05.20-P-7295PK. Install new camshaft solenoid stop plugs (C, Figure 7)
into new camshaft solenoids (A, Figure 7).
2. Install camshaft solenoid adapter harnesses (B, Figure 7): Connect adapter harness between connector on camshaft solenoid and engine harness.
Secure adapter cable (B, Figure 7) to engine with cable ties (arrows).
Note:
Ensure cable ties (arrows) are secured to engine as shown otherwise cover will not properly fit over camshaft solenoids (A) and wire chafing may occur.