SLK 230 (170.449) L4-2.3L SC (111.983) (2001)
Steering Wheel: Removal and Replacement
Removing And Installing Steering Wheel
Model 208 Shown
1
Move in or push in adjustable steering column fully
2
Position steering wheel (32) horizontal (front wheels in straight-ahead position)
3
Remove ignition key and allow steering lock to lock in position
4
Remove electronic ignition key
NOTE: Electric steering column adjustment (ESC) locks
5
Disconnect battery ground cable
CAUTION:
-
Protect ground cable against unintentional ground contact
-
Notes for carrying out repair, body and welding work on vehicles with airbag units or emergency tensioning retractor units
6
Remove airbag unit on steering wheel
7
Unscrew countersunk screw (32c), steadying the steering wheel (32)
-
Installation: Replace countersunk screw
8
Remove steering wheel, passing through the cable of the airbag unit
NOTE: Installation:Align recesses of the splines in the steering wheel with the markings on the steering shaft (arrow)
9
Check horn/airbag clock spring contact (A45) for damage